25 KiB
Kubernetes Ingress Controller
This guide explains how to use Træfik as an Ingress controller in a Kubernetes cluster.
If you are not familiar with Ingresses in Kubernetes you might want to read the Kubernetes user guide
The config files used in this guide can be found in the examples directory
Prerequisites
-
A working Kubernetes cluster. If you want to follow along with this guide, you should setup minikube on your machine, as it is the quickest way to get a local Kubernetes cluster setup for experimentation and development.
-
The
kubectlbinary should be installed on your workstation.
Role Based Access Control configuration (Kubernetes 1.6+ only)
Kubernetes introduces Role Based Access Control (RBAC) in 1.6+ to allow fine-grained control of Kubernetes resources and API.
If your cluster is configured with RBAC, you will need to authorize Træfik to use the Kubernetes API. There are two ways to set up the proper permission: Via namespace-specific RoleBindings or a single, global ClusterRoleBinding.
RoleBindings per namespace enable to restrict granted permissions to the very namespaces only that Træfik is watching over, thereby following the least-privileges principle. This is the preferred approach if Træfik is not supposed to watch all namespaces, and the set of namespaces does not change dynamically. Otherwise, a single ClusterRoleBinding must be employed.
!!! note RoleBindings per namespace are available in Træfik 1.5 and later. Please use ClusterRoleBindings for older versions.
For the sake of simplicity, this guide will use a ClusterRoleBinding:
---
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
name: traefik-ingress-controller
rules:
- apiGroups:
- ""
resources:
- services
- endpoints
- secrets
verbs:
- get
- list
- watch
- apiGroups:
- extensions
resources:
- ingresses
verbs:
- get
- list
- watch
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
name: traefik-ingress-controller
roleRef:
apiGroup: rbac.authorization.k8s.io
kind: ClusterRole
name: traefik-ingress-controller
subjects:
- kind: ServiceAccount
name: traefik-ingress-controller
namespace: kube-system
examples/k8s/traefik-rbac.yaml
kubectl apply -f https://raw.githubusercontent.com/containous/traefik/master/examples/k8s/traefik-rbac.yaml
For namespaced restrictions, one RoleBinding is required per watched namespace along with a corresponding configuration of Træfik's kubernetes.namespaces parameter.
Deploy Træfik using a Deployment or DaemonSet
It is possible to use Træfik with a Deployment or a DaemonSet object, whereas both options have their own pros and cons:
- The scalability is much better when using a Deployment, because you will have a Single-Pod-per-Node model when using the DeaemonSet.
- It is possible to exclusively run a Service on a dedicated set of machines using taints and tolerations with a DaemonSet.
- On the other hand the DaemonSet allows you to access any Node directly on Port 80 and 443, where you have to setup a Service object with a Deployment.
The Deployment objects looks like this:
---
apiVersion: v1
kind: ServiceAccount
metadata:
name: traefik-ingress-controller
namespace: kube-system
---
kind: Deployment
apiVersion: extensions/v1beta1
metadata:
name: traefik-ingress-controller
namespace: kube-system
labels:
k8s-app: traefik-ingress-lb
spec:
replicas: 1
selector:
matchLabels:
k8s-app: traefik-ingress-lb
template:
metadata:
labels:
k8s-app: traefik-ingress-lb
name: traefik-ingress-lb
spec:
serviceAccountName: traefik-ingress-controller
terminationGracePeriodSeconds: 60
containers:
- image: traefik
name: traefik-ingress-lb
args:
- --web
- --kubernetes
---
kind: Service
apiVersion: v1
metadata:
name: traefik-ingress-service
namespace: kube-system
spec:
selector:
k8s-app: traefik-ingress-lb
ports:
- protocol: TCP
port: 80
name: web
- protocol: TCP
port: 8080
name: admin
type: NodePort
examples/k8s/traefik-deployment.yaml
!!! note The Service will expose two NodePorts which allow access to the ingress and the web interface.
The DaemonSet objects looks not much different:
---
apiVersion: v1
kind: ServiceAccount
metadata:
name: traefik-ingress-controller
namespace: kube-system
---
kind: DaemonSet
apiVersion: extensions/v1beta1
metadata:
name: traefik-ingress-controller
namespace: kube-system
labels:
k8s-app: traefik-ingress-lb
spec:
template:
metadata:
labels:
k8s-app: traefik-ingress-lb
name: traefik-ingress-lb
spec:
serviceAccountName: traefik-ingress-controller
terminationGracePeriodSeconds: 60
hostNetwork: true
containers:
- image: traefik
name: traefik-ingress-lb
ports:
- name: http
containerPort: 80
hostPort: 80
- name: admin
containerPort: 8080
securityContext:
privileged: true
args:
- -d
- --web
- --kubernetes
---
kind: Service
apiVersion: v1
metadata:
name: traefik-ingress-service
namespace: kube-system
spec:
selector:
k8s-app: traefik-ingress-lb
ports:
- protocol: TCP
port: 80
name: web
- protocol: TCP
port: 8080
name: admin
type: NodePort
To deploy Træfik to your cluster start by submitting one of the YAML files to the cluster with kubectl:
kubectl apply -f https://raw.githubusercontent.com/containous/traefik/master/examples/k8s/traefik-deployment.yaml
kubectl apply -f https://raw.githubusercontent.com/containous/traefik/master/examples/k8s/traefik-ds.yaml
There are some significant differences between using Deployments and DaemonSets:
- The Deployment has easier up and down scaling possibilities. It can implement full pod lifecycle and supports rolling updates from Kubernetes 1.2. At least one Pod is needed to run the Deployment.
- The DaemonSet automatically scales to all nodes that meets a specific selector and guarantees to fill nodes one at a time. Rolling updates are fully supported from Kubernetes 1.7 for DaemonSets as well.
Check the Pods
Now lets check if our command was successful.
Start by listing the pods in the kube-system namespace:
kubectl --namespace=kube-system get pods
NAME READY STATUS RESTARTS AGE
kube-addon-manager-minikubevm 1/1 Running 0 4h
kubernetes-dashboard-s8krj 1/1 Running 0 4h
traefik-ingress-controller-678226159-eqseo 1/1 Running 0 7m
You should see that after submitting the Deployment or DaemonSet to Kubernetes it has launched a Pod, and it is now running. It might take a few moments for kubernetes to pull the Træfik image and start the container.
!!! note
You could also check the deployment with the Kubernetes dashboard, run
minikube dashboard to open it in your browser, then choose the kube-system
namespace from the menu at the top right of the screen.
You should now be able to access Træfik on port 80 of your Minikube instance when using the DaemonSet:
curl $(minikube ip)
404 page not found
If you decided to use the deployment, then you need to target the correct NodePort, which can be seen when you execute kubectl get services --namespace=kube-system.
curl $(minikube ip):<NODEPORT>
404 page not found
!!! note We expect to see a 404 response here as we haven't yet given Træfik any configuration.
All further examples below assume a DaemonSet installation. Deployment users will need to append the NodePort when constructing requests.
Deploy Træfik using Helm Chart
Instead of installing Træfik via an own object, you can also use the Træfik Helm chart.
This allows more complex configuration via Kubernetes ConfigMap and enabled TLS certificates.
Install Træfik chart by:
helm install stable/traefik
For more information, check out the doc.
Submitting An Ingress to the cluster.
Lets start by creating a Service and an Ingress that will expose the Træfik Web UI.
apiVersion: v1
kind: Service
metadata:
name: traefik-web-ui
namespace: kube-system
spec:
selector:
k8s-app: traefik-ingress-lb
ports:
- port: 80
targetPort: 8080
---
apiVersion: extensions/v1beta1
kind: Ingress
metadata:
name: traefik-web-ui
namespace: kube-system
annotations:
kubernetes.io/ingress.class: traefik
spec:
rules:
- host: traefik-ui.minikube
http:
paths:
- backend:
serviceName: traefik-web-ui
servicePort: 80
kubectl apply -f https://raw.githubusercontent.com/containous/traefik/master/examples/k8s/ui.yaml
Now lets setup an entry in our /etc/hosts file to route traefik-ui.minikube to our cluster.
In production you would want to set up real dns entries.
You can get the ip address of your minikube instance by running minikube ip
echo "$(minikube ip) traefik-ui.minikube" | sudo tee -a /etc/hosts
We should now be able to visit traefik-ui.minikube in the browser and view the Træfik Web UI.
Add a TLS Certificate to the Ingress
!!! note For this example to work you need a TLS entrypoint. You don't have to provide a TLS certificate at this point. For more details see here.
To setup an HTTPS-protected ingress, you can leverage the TLS feature of the ingress resource.
apiVersion: extensions/v1beta1
kind: Ingress
metadata:
name: traefik-web-ui
namespace: kube-system
annotations:
kubernetes.io/ingress.class: traefik
spec:
rules:
- host: traefik-ui.minikube
http:
paths:
- backend:
serviceName: traefik-web-ui
servicePort: 80
tls:
secretName: traefik-ui-tls-cert
In addition to the modified ingress you need to provide the TLS certificate via a kubernetes secret in the same namespace as the ingress. The following two commands will generate a new certificate and create a secret containing the key and cert files.
openssl req -x509 -nodes -days 365 -newkey rsa:2048 -keyout tls.key -out tls.crt -subj "/CN=traefik-ui.minikube"
kubectl -n kube-system create secret tls traefik-ui-tls-cert --key=tls.key --cert=tls.crt
If there are any errors while loading the TLS section of an ingress, the whole ingress will be skipped.
!!! note
The secret must have two entries named tls.keyand tls.crt. See the kubernetes documentation for more details.
!!! note
The TLS certificates will be added to all entrypoints defined by the ingress annotation traefik.frontend.entryPoints. If no such annotation is provided, the TLS certificates will be added to all TLS-enabled defaultEntryPoints.
!!! note
The field hosts in the TLS configuration is ignored. Instead, the domains provided by the certificate are used for this purpose. It is recommended to not use wildcard certificates as they will match globally.
Basic Authentication
It's possible to add additional authentication annotations in the Ingress rule. The source of the authentication is a secret that contains usernames and passwords inside the key auth. To read about basic auth limitations see the Kubernetes Ingress configuration page.
Creating the Secret
A. Use htpasswd to create a file containing the username and the base64-encoded password:
htpasswd -c ./auth myusername
You will be prompted for a password which you will have to enter twice.
htpasswd will create a file with the following:
cat auth
myusername:$apr1$78Jyn/1K$ERHKVRPPlzAX8eBtLuvRZ0
B. Now use kubectl to create a secret in the monitoring namespace using the file created by htpasswd.
kubectl create secret generic mysecret --from-file auth --namespace=monitoring
!!! note Secret must be in same namespace as the ingress rule.
C. Create the ingress using the following annotations to specify basic auth and that the username and password is stored in mysecret.
ingress.kubernetes.io/auth-type: "basic"ingress.kubernetes.io/auth-secret: "mysecret"
Following is a full ingress example based on Prometheus:
apiVersion: extensions/v1beta1
kind: Ingress
metadata:
name: prometheus-dashboard
namespace: monitoring
annotations:
kubernetes.io/ingress.class: traefik
ingress.kubernetes.io/auth-type: "basic"
ingress.kubernetes.io/auth-secret: "mysecret"
spec:
rules:
- host: dashboard.prometheus.example.com
http:
paths:
- backend:
serviceName: prometheus
servicePort: 9090
You can apply the example ingress as following:
kubectl create -f prometheus-ingress.yaml -n monitoring
Name based routing
In this example we are going to setup websites for 3 of the United Kingdoms best loved cheeses, Cheddar, Stilton and Wensleydale.
First lets start by launching the 3 pods for the cheese websites.
---
kind: Deployment
apiVersion: extensions/v1beta1
metadata:
name: stilton
labels:
app: cheese
cheese: stilton
spec:
replicas: 2
selector:
matchLabels:
app: cheese
task: stilton
template:
metadata:
labels:
app: cheese
task: stilton
version: v0.0.1
spec:
containers:
- name: cheese
image: errm/cheese:stilton
ports:
- containerPort: 80
---
kind: Deployment
apiVersion: extensions/v1beta1
metadata:
name: cheddar
labels:
app: cheese
cheese: cheddar
spec:
replicas: 2
selector:
matchLabels:
app: cheese
task: cheddar
template:
metadata:
labels:
app: cheese
task: cheddar
version: v0.0.1
spec:
containers:
- name: cheese
image: errm/cheese:cheddar
ports:
- containerPort: 80
---
kind: Deployment
apiVersion: extensions/v1beta1
metadata:
name: wensleydale
labels:
app: cheese
cheese: wensleydale
spec:
replicas: 2
selector:
matchLabels:
app: cheese
task: wensleydale
template:
metadata:
labels:
app: cheese
task: wensleydale
version: v0.0.1
spec:
containers:
- name: cheese
image: errm/cheese:wensleydale
ports:
- containerPort: 80
examples/k8s/cheese-deployments.yaml
kubectl apply -f https://raw.githubusercontent.com/containous/traefik/master/examples/k8s/cheese-deployments.yaml
Next we need to setup a service for each of the cheese pods.
---
apiVersion: v1
kind: Service
metadata:
name: stilton
spec:
ports:
- name: http
targetPort: 80
port: 80
selector:
app: cheese
task: stilton
---
apiVersion: v1
kind: Service
metadata:
name: cheddar
spec:
ports:
- name: http
targetPort: 80
port: 80
selector:
app: cheese
task: cheddar
---
apiVersion: v1
kind: Service
metadata:
name: wensleydale
annotations:
traefik.backend.circuitbreaker: "NetworkErrorRatio() > 0.5"
spec:
ports:
- name: http
targetPort: 80
port: 80
selector:
app: cheese
task: wensleydale
!!! note
We also set a circuit breaker expression for one of the backends by setting the traefik.backend.circuitbreaker annotation on the service.
examples/k8s/cheese-services.yaml
kubectl apply -f https://raw.githubusercontent.com/containous/traefik/master/examples/k8s/cheese-services.yaml
Now we can submit an ingress for the cheese websites.
apiVersion: extensions/v1beta1
kind: Ingress
metadata:
name: cheese
annotations:
kubernetes.io/ingress.class: traefik
spec:
rules:
- host: stilton.minikube
http:
paths:
- path: /
backend:
serviceName: stilton
servicePort: http
- host: cheddar.minikube
http:
paths:
- path: /
backend:
serviceName: cheddar
servicePort: http
- host: wensleydale.minikube
http:
paths:
- path: /
backend:
serviceName: wensleydale
servicePort: http
examples/k8s/cheese-ingress.yaml
!!! note we list each hostname, and add a backend service.
kubectl apply -f https://raw.githubusercontent.com/containous/traefik/master/examples/k8s/cheese-ingress.yaml
Now visit the Træfik dashboard and you should see a frontend for each host. Along with a backend listing for each service with a Server set up for each pod.
If you edit your /etc/hosts again you should be able to access the cheese websites in your browser.
echo "$(minikube ip) stilton.minikube cheddar.minikube wensleydale.minikube" | sudo tee -a /etc/hosts
Path based routing
Now lets suppose that our fictional client has decided that while they are super happy about our cheesy web design, when they asked for 3 websites they had not really bargained on having to buy 3 domain names.
No problem, we say, why don't we reconfigure the sites to host all 3 under one domain.
apiVersion: extensions/v1beta1
kind: Ingress
metadata:
name: cheeses
annotations:
kubernetes.io/ingress.class: traefik
traefik.frontend.rule.type: PathPrefixStrip
spec:
rules:
- host: cheeses.minikube
http:
paths:
- path: /stilton
backend:
serviceName: stilton
servicePort: http
- path: /cheddar
backend:
serviceName: cheddar
servicePort: http
- path: /wensleydale
backend:
serviceName: wensleydale
servicePort: http
examples/k8s/cheeses-ingress.yaml
!!! note
we are configuring Træfik to strip the prefix from the url path with the traefik.frontend.rule.type annotation so that we can use the containers from the previous example without modification.
kubectl apply -f https://raw.githubusercontent.com/containous/traefik/master/examples/k8s/cheeses-ingress.yaml
echo "$(minikube ip) cheeses.minikube" | sudo tee -a /etc/hosts
You should now be able to visit the websites in your browser.
Specifying priority for routing
Sometimes you need to specify priority for ingress route, especially when handling wildcard routes.
This can be done by adding annotation traefik.frontend.priority, i.e.:
apiVersion: extensions/v1beta1
kind: Ingress
metadata:
name: wildcard-cheeses
annotations:
traefik.frontend.priority: "1"
spec:
rules:
- host: *.minikube
http:
paths:
- path: /
backend:
serviceName: stilton
servicePort: http
kind: Ingress
metadata:
name: specific-cheeses
annotations:
traefik.frontend.priority: "2"
spec:
rules:
- host: specific.minikube
http:
paths:
- path: /
backend:
serviceName: stilton
servicePort: http
Note that priority values must be quoted to avoid them being interpreted as numbers (which are illegal for annotations).
Forwarding to ExternalNames
When specifying an ExternalName,
Træfik will forward requests to the given host accordingly and use HTTPS when the Service port matches 443.
This still requires setting up a proper port mapping on the Service from the Ingress port to the (external) Service port.
Disable passing the Host header
By default Træfik will pass the incoming Host header on to the upstream resource.
There are times however where you may not want this to be the case. For example if your service is of the ExternalName type.
Disable entirely
Add the following to your toml config:
disablePassHostHeaders = true
Disable per ingress
To disable passing the Host header per ingress resource set the traefik.frontend.passHostHeader annotation on your ingress to false.
Here is an example ingress definition:
apiVersion: extensions/v1beta1
kind: Ingress
metadata:
name: example
annotations:
kubernetes.io/ingress.class: traefik
traefik.frontend.passHostHeader: "false"
spec:
rules:
- host: example.com
http:
paths:
- path: /static
backend:
serviceName: static
servicePort: https
And an example service definition:
apiVersion: v1
kind: Service
metadata:
name: static
spec:
ports:
- name: https
port: 443
type: ExternalName
externalName: static.otherdomain.com
If you were to visit example.com/static the request would then be passed onto static.otherdomain.com/static and static.otherdomain.com would receive the request with the Host header being static.otherdomain.com.
!!! note
The per ingress annotation overides whatever the global value is set to.
So you could set disablePassHostHeaders to true in your toml file and then enable passing
the host header per ingress if you wanted.
Partitioning the Ingress object space
By default, Træfik processes every Ingress objects it observes. At times, however, it may be desirable to ignore certain objects. The following sub-sections describe common use cases and how they can be handled with Træfik.
Between Træfik and other Ingress controller implementations
Sometimes Træfik runs along other Ingress controller implementations. One such example is when both Træfik and a cloud provider Ingress controller are active.
The kubernetes.io/ingress.class annotation can be attached to any Ingress object in order to control whether Træfik should handle it.
If the annotation is missing, contains an empty value, or the value traefik, then the Træfik controller will take responsibility and process the associated Ingress object. If the annotation contains any other value (usually the name of a different Ingress controller), Træfik will ignore the object.
Between multiple Træfik Deployments
Sometimes multiple Træfik Deployments are supposed to run concurrently. For instance, it is conceivable to have one Deployment deal with internal and another one with external traffic.
For such cases, it is advisable to classify Ingress objects through a label and configure the labelSelector option per each Træfik Deployment accordingly. To stick with the internal/external example above, all Ingress objects meant for internal traffic could receive a traffic-type: internal label while objects designated for external traffic receive a traffic-type: external label. The label selectors on the Træfik Deployments would then be traffic-type=internal and traffic-type=external, respectively.
Production advice
Resource limitations
The examples shown deliberately do not specify any resource limitations as there is no one size fits all.
In a production environment, however, it is important to set proper bounds, especially with regards to CPU:
- too strict and Traefik will be throttled while serving requests (as Kubernetes imposes hard quotas)
- too loose and Traefik may waste resources not available for other containers
When in doubt, you should measure your resource needs, and adjust requests and limits accordingly.