traefik/docs/toml.md

997 lines
25 KiB
Markdown
Raw Normal View History

# Global configuration
## Main section
```toml
# traefik.toml
################################################################
# Global configuration
################################################################
# Traefik logs file
# If not defined, logs to stdout
#
# Optional
#
# traefikLogsFile = "log/traefik.log"
# Access logs file
#
# Optional
#
# accessLogsFile = "log/access.log"
# Log level
#
# Optional
# Default: "ERROR"
#
# logLevel = "ERROR"
# Backends throttle duration: minimum duration between 2 events from providers
# before applying a new configuration. It avoids unnecessary reloads if multiples events
# are sent in a short amount of time.
#
# Optional
# Default: "2s"
#
# ProvidersThrottleDuration = "5s"
# If non-zero, controls the maximum idle (keep-alive) to keep per-host. If zero, DefaultMaxIdleConnsPerHost is used.
# If you encounter 'too many open files' errors, you can either change this value, or change `ulimit` value.
#
# Optional
# Default: http.DefaultMaxIdleConnsPerHost
#
# MaxIdleConnsPerHost = 200
2016-07-31 16:08:33 +00:00
# If set to true invalid SSL certificates are accepted for backends.
# Note: This disables detection of man-in-the-middle attacks so should only be used on secure backend networks.
# Optional
# Default: false
#
# InsecureSkipVerify = true
# Entrypoints to be used by frontends that do not specify any entrypoint.
# Each frontend can specify its own entrypoints.
#
# Optional
# Default: ["http"]
#
# defaultEntryPoints = ["http", "https"]
```
## Entrypoints definition
```toml
# Entrypoints definition
#
# Optional
# Default:
# [entryPoints]
# [entryPoints.http]
# address = ":80"
#
# To redirect an http entrypoint to an https entrypoint (with SNI support):
# [entryPoints]
# [entryPoints.http]
# address = ":80"
# [entryPoints.http.redirect]
# entryPoint = "https"
# [entryPoints.https]
# address = ":443"
# [entryPoints.https.tls]
# [[entryPoints.https.tls.certificates]]
# CertFile = "integration/fixtures/https/snitest.com.cert"
# KeyFile = "integration/fixtures/https/snitest.com.key"
# [[entryPoints.https.tls.certificates]]
# CertFile = "integration/fixtures/https/snitest.org.cert"
# KeyFile = "integration/fixtures/https/snitest.org.key"
#
# To redirect an entrypoint rewriting the URL:
# [entryPoints]
# [entryPoints.http]
# address = ":80"
# [entryPoints.http.redirect]
# regex = "^http://localhost/(.*)"
# replacement = "http://mydomain/$1"
#
# Only accept clients that present a certificate signed by a specified
# Certificate Authority (CA)
# ClientCAFiles can be configured with multiple CA:s in the same file or
# use multiple files containing one or several CA:s. The CA:s has to be in PEM format.
# All clients will be required to present a valid cert.
# The requirement will apply to all server certs in the entrypoint
# In the example below both snitest.com and snitest.org will require client certs
#
# [entryPoints]
# [entryPoints.https]
# address = ":443"
# [entryPoints.https.tls]
# ClientCAFiles = ["tests/clientca1.crt", "tests/clientca2.crt"]
# [[entryPoints.https.tls.certificates]]
# CertFile = "integration/fixtures/https/snitest.com.cert"
# KeyFile = "integration/fixtures/https/snitest.com.key"
# [[entryPoints.https.tls.certificates]]
# CertFile = "integration/fixtures/https/snitest.org.cert"
# KeyFile = "integration/fixtures/https/snitest.org.key"
#
# To enable basic auth on an entrypoint
# with 2 user/pass: test:test and test2:test2
# Passwords can be encoded in MD5, SHA1 and BCrypt: you can use htpasswd to generate those ones
# [entryPoints]
# [entryPoints.http]
# address = ":80"
# [entryPoints.http.auth.basic]
# users = ["test:$apr1$H6uskkkW$IgXLP6ewTrSuBkTrqE8wj/", "test2:$apr1$d9hr9HBB$4HxwgUir3HP4EsggP/QNo0"]
#
# To enable digest auth on an entrypoint
# with 2 user/realm/pass: test:traefik:test and test2:traefik:test2
# You can use htdigest to generate those ones
# [entryPoints]
# [entryPoints.http]
# address = ":80"
# [entryPoints.http.auth.basic]
# users = ["test:traefik:a2688e031edb4be6a3797f3882655c05 ", "test2:traefik:518845800f9e2bfb1f1f740ec24f074e"]
2016-04-19 08:00:33 +00:00
[entryPoints]
[entryPoints.http]
address = ":80"
```
## Retry configuration
```toml
# Enable retry sending request if network error
#
# Optional
#
[retry]
# Number of attempts
#
# Optional
# Default: (number servers in backend) -1
#
# attempts = 3
```
## ACME (Let's Encrypt) configuration
```toml
2016-04-18 16:31:45 +00:00
# Sample entrypoint configuration when using ACME
[entryPoints]
[entryPoints.https]
address = ":443"
[entryPoints.https.tls]
# Enable ACME (Let's Encrypt): automatic SSL
#
# Optional
#
[acme]
# Email address used for registration
#
# Required
#
email = "test@traefik.io"
# File used for certificates storage.
# WARNING, if you use Traefik in Docker, you have 2 options:
# - create a file on your host and mount it as a volume
# storageFile = "acme.json"
# $ docker run -v "/my/host/acme.json:acme.json" traefik
# - mount the folder containing the file as a volume
# storageFile = "/etc/traefik/acme/acme.json"
# $ docker run -v "/my/host/acme:/etc/traefik/acme" traefik
#
# Required
#
storageFile = "acme.json"
# Entrypoint to proxy acme challenge to.
# WARNING, must point to an entrypoint on port 443
#
# Required
#
entryPoint = "https"
# Enable on demand certificate. This will request a certificate from Let's Encrypt during the first TLS handshake for a hostname that does not yet have a certificate.
# WARNING, TLS handshakes will be slow when requesting a hostname certificate for the first time, this can leads to DoS attacks.
# WARNING, Take note that Let's Encrypt have rate limiting: https://letsencrypt.org/docs/rate-limits
#
# Optional
#
# onDemand = true
# Enable certificate generation on frontends Host rules. This will request a certificate from Let's Encrypt for each frontend with a Host rule.
# For example, a rule Host:test1.traefik.io,test2.traefik.io will request a certificate with main domain test1.traefik.io and SAN test2.traefik.io.
#
# Optional
#
# OnHostRule = true
# CA server to use
# Uncomment the line to run on the staging let's encrypt server
# Leave comment to go to prod
#
# Optional
#
# caServer = "https://acme-staging.api.letsencrypt.org/directory"
# Domains list
# You can provide SANs (alternative domains) to each main domain
2016-04-18 16:31:45 +00:00
# All domains must have A/AAAA records pointing to Traefik
# WARNING, Take note that Let's Encrypt have rate limiting: https://letsencrypt.org/docs/rate-limits
# Each domain & SANs will lead to a certificate request.
#
# [[acme.domains]]
# main = "local1.com"
# sans = ["test1.local1.com", "test2.local1.com"]
# [[acme.domains]]
# main = "local2.com"
# sans = ["test1.local2.com", "test2x.local2.com"]
# [[acme.domains]]
# main = "local3.com"
# [[acme.domains]]
# main = "local4.com"
[[acme.domains]]
main = "local1.com"
sans = ["test1.local1.com", "test2.local1.com"]
[[acme.domains]]
main = "local3.com"
[[acme.domains]]
main = "local4.com"
```
# Configuration backends
## File backend
Like any other reverse proxy, Træfɪk can be configured with a file. You have two choices:
- simply add your configuration at the end of the global configuration file `traefik.toml`:
```toml
# traefik.toml
logLevel = "DEBUG"
defaultEntryPoints = ["http", "https"]
[entryPoints]
[entryPoints.http]
address = ":80"
[entryPoints.http.redirect]
entryPoint = "https"
[entryPoints.https]
address = ":443"
[entryPoints.https.tls]
[[entryPoints.https.tls.certificates]]
CertFile = "integration/fixtures/https/snitest.com.cert"
KeyFile = "integration/fixtures/https/snitest.com.key"
[[entryPoints.https.tls.certificates]]
CertFile = "integration/fixtures/https/snitest.org.cert"
KeyFile = "integration/fixtures/https/snitest.org.key"
[file]
# rules
[backends]
[backends.backend1]
[backends.backend1.circuitbreaker]
expression = "NetworkErrorRatio() > 0.5"
[backends.backend1.servers.server1]
url = "http://172.17.0.2:80"
weight = 10
[backends.backend1.servers.server2]
url = "http://172.17.0.3:80"
weight = 1
[backends.backend2]
[backends.backend1.maxconn]
amount = 10
extractorfunc = "request.host"
[backends.backend2.LoadBalancer]
method = "drr"
[backends.backend2.servers.server1]
url = "http://172.17.0.4:80"
weight = 1
[backends.backend2.servers.server2]
url = "http://172.17.0.5:80"
weight = 2
[frontends]
[frontends.frontend1]
backend = "backend2"
[frontends.frontend1.routes.test_1]
rule = "Host:test.localhost"
[frontends.frontend2]
backend = "backend1"
passHostHeader = true
priority = 10
entrypoints = ["https"] # overrides defaultEntryPoints
[frontends.frontend2.routes.test_1]
rule = "Host:{subdomain:[a-z]+}.localhost"
[frontends.frontend3]
entrypoints = ["http", "https"] # overrides defaultEntryPoints
backend = "backend2"
rule = "Path:/test"
```
2016-04-21 22:38:44 +00:00
- or put your rules in a separate file, for example `rules.toml`:
```toml
# traefik.toml
logLevel = "DEBUG"
[entryPoints]
[entryPoints.http]
address = ":80"
[entryPoints.http.redirect]
entryPoint = "https"
[entryPoints.https]
address = ":443"
[entryPoints.https.tls]
[[entryPoints.https.tls.certificates]]
CertFile = "integration/fixtures/https/snitest.com.cert"
KeyFile = "integration/fixtures/https/snitest.com.key"
[[entryPoints.https.tls.certificates]]
CertFile = "integration/fixtures/https/snitest.org.cert"
KeyFile = "integration/fixtures/https/snitest.org.key"
[file]
filename = "rules.toml"
```
```toml
# rules.toml
[backends]
[backends.backend1]
[backends.backend1.circuitbreaker]
expression = "NetworkErrorRatio() > 0.5"
[backends.backend1.servers.server1]
url = "http://172.17.0.2:80"
weight = 10
[backends.backend1.servers.server2]
url = "http://172.17.0.3:80"
weight = 1
[backends.backend2]
[backends.backend1.maxconn]
amount = 10
extractorfunc = "request.host"
[backends.backend2.LoadBalancer]
method = "drr"
[backends.backend2.servers.server1]
url = "http://172.17.0.4:80"
weight = 1
[backends.backend2.servers.server2]
url = "http://172.17.0.5:80"
weight = 2
[frontends]
[frontends.frontend1]
backend = "backend2"
[frontends.frontend1.routes.test_1]
rule = "Host:test.localhost"
[frontends.frontend2]
backend = "backend1"
passHostHeader = true
priority = 10
entrypoints = ["https"] # overrides defaultEntryPoints
[frontends.frontend2.routes.test_1]
rule = "Host:{subdomain:[a-z]+}.localhost"
[frontends.frontend3]
entrypoints = ["http", "https"] # overrides defaultEntryPoints
backend = "backend2"
rule = "Path:/test"
```
If you want Træfɪk to watch file changes automatically, just add:
```toml
[file]
watch = true
```
## API backend
Træfik can be configured using a RESTful api.
To enable it:
```toml
[web]
address = ":8080"
# SSL certificate and key used
#
# Optional
#
# CertFile = "traefik.crt"
# KeyFile = "traefik.key"
#
# Set REST API to read-only mode
#
# Optional
# ReadOnly = false
```
- `/`: provides a simple HTML frontend of Træfik
![Web UI Providers](img/web.frontend.png)
![Web UI Health](img/traefik-health.png)
2016-08-19 16:02:26 +00:00
- `/ping`: `GET` simple endpoint to check for Træfik process liveness.
```sh
$ curl -sv "http://localhost:8080/ping"
* Trying ::1...
* Connected to localhost (::1) port 8080 (#0)
> GET /ping HTTP/1.1
> Host: localhost:8080
> User-Agent: curl/7.43.0
> Accept: */*
>
< HTTP/1.1 200 OK
< Date: Thu, 25 Aug 2016 01:35:36 GMT
< Content-Length: 2
< Content-Type: text/plain; charset=utf-8
<
* Connection #0 to host localhost left intact
OK
```
- `/health`: `GET` json metrics
```sh
$ curl -s "http://localhost:8080/health" | jq .
{
// Træfɪk PID
"pid": 2458,
// Træfɪk server uptime (formated time)
"uptime": "39m6.885931127s",
// Træfɪk server uptime in seconds
"uptime_sec": 2346.885931127,
// current server date
"time": "2015-10-07 18:32:24.362238909 +0200 CEST",
// current server date in seconds
"unixtime": 1444235544,
// count HTTP response status code in realtime
"status_code_count": {
"502": 1
},
// count HTTP response status code since Træfɪk started
"total_status_code_count": {
"200": 7,
"404": 21,
"502": 13
},
// count HTTP response
"count": 1,
// count HTTP response
"total_count": 41,
// sum of all response time (formated time)
"total_response_time": "35.456865605s",
// sum of all response time in seconds
"total_response_time_sec": 35.456865605,
// average response time (formated time)
"average_response_time": "864.8016ms",
// average response time in seconds
"average_response_time_sec": 0.8648016000000001
}
```
- `/api`: `GET` configuration for all providers
```sh
$ curl -s "http://localhost:8080/api" | jq .
{
"file": {
"frontends": {
"frontend2": {
"routes": {
"test_2": {
"rule": "Path:/test"
}
},
"backend": "backend1"
},
"frontend1": {
"routes": {
"test_1": {
"rule": "Host:test.localhost"
}
},
"backend": "backend2"
}
},
"backends": {
"backend2": {
"loadBalancer": {
"method": "drr"
},
"servers": {
"server2": {
"weight": 2,
"URL": "http://172.17.0.5:80"
},
"server1": {
"weight": 1,
"url": "http://172.17.0.4:80"
}
}
},
"backend1": {
"loadBalancer": {
"method": "wrr"
},
"circuitBreaker": {
"expression": "NetworkErrorRatio() > 0.5"
},
"servers": {
"server2": {
"weight": 1,
"url": "http://172.17.0.3:80"
},
"server1": {
"weight": 10,
"url": "http://172.17.0.2:80"
}
}
}
}
}
}
```
- `/api/providers`: `GET` providers
- `/api/providers/{provider}`: `GET` or `PUT` provider
- `/api/providers/{provider}/backends`: `GET` backends
- `/api/providers/{provider}/backends/{backend}`: `GET` a backend
- `/api/providers/{provider}/backends/{backend}/servers`: `GET` servers in a backend
- `/api/providers/{provider}/backends/{backend}/servers/{server}`: `GET` a server in a backend
- `/api/providers/{provider}/frontends`: `GET` frontends
- `/api/providers/{provider}/frontends/{frontend}`: `GET` a frontend
- `/api/providers/{provider}/frontends/{frontend}/routes`: `GET` routes in a frontend
- `/api/providers/{provider}/frontends/{frontend}/routes/{route}`: `GET` a route in a frontend
## Docker backend
Træfɪk can be configured to use Docker as a backend configuration:
```toml
################################################################
# Docker configuration backend
################################################################
# Enable Docker configuration backend
#
# Optional
#
[docker]
# Docker server endpoint. Can be a tcp or a unix socket endpoint.
#
# Required
#
endpoint = "unix:///var/run/docker.sock"
# Default domain used.
# Can be overridden by setting the "traefik.domain" label on a container.
#
# Required
#
domain = "docker.localhost"
# Enable watch docker changes
#
# Optional
#
watch = true
# Override default configuration template. For advanced users :)
#
# Optional
#
# filename = "docker.tmpl"
# Expose containers by default in traefik
#
# Optional
# Default: true
#
exposedbydefault = true
# Enable docker TLS connection
#
# [docker.tls]
# ca = "/etc/ssl/ca.crt"
# cert = "/etc/ssl/docker.crt"
# key = "/etc/ssl/docker.key"
# insecureskipverify = true
```
Labels can be used on containers to override default behaviour:
- `traefik.backend=foo`: assign the container to `foo` backend
- `traefik.port=80`: register this port. Useful when the container exposes multiples ports.
- `traefik.protocol=https`: override the default `http` protocol
- `traefik.weight=10`: assign this weight to the container
- `traefik.enable=false`: disable this container in Træfɪk
- `traefik.frontend.rule=Host:test.traefik.io`: override the default frontend rule (Default: `Host:{containerName}.{domain}`).
- `traefik.frontend.passHostHeader=true`: forward client `Host` header to the backend.
- `traefik.frontend.priority=10`: override default frontend priority
- `traefik.frontend.entryPoints=http,https`: assign this frontend to entry points `http` and `https`. Overrides `defaultEntryPoints`.
- `traefik.docker.network`: Set the docker network to use for connections to this container
NB: when running inside a container, Træfɪk will need network access through `docker network connect <network> <traefik-container>`
## Marathon backend
Træfɪk can be configured to use Marathon as a backend configuration:
```toml
################################################################
# Mesos/Marathon configuration backend
################################################################
# Enable Marathon configuration backend
#
# Optional
#
[marathon]
# Marathon server endpoint.
# You can also specify multiple endpoint for Marathon:
# endpoint := "http://10.241.1.71:8080,10.241.1.72:8080,10.241.1.73:8080"
#
# Required
#
endpoint = "http://127.0.0.1:8080"
# Enable watch Marathon changes
#
# Optional
#
watch = true
# Default domain used.
#
# Required
#
domain = "marathon.localhost"
# Override default configuration template. For advanced users :)
#
# Optional
#
# filename = "marathon.tmpl"
# Expose Marathon apps by default in traefik
#
# Optional
# Default: false
#
# exposedByDefault = true
# Convert Marathon groups to subdomains
# Default behavior: /foo/bar/myapp => foo-bar-myapp.{defaultDomain}
# with groupsAsSubDomains enabled: /foo/bar/myapp => myapp.bar.foo.{defaultDomain}
#
# Optional
# Default: false
#
# groupsAsSubDomains = true
# Enable Marathon basic authentication
#
# Optional
#
# [marathon.basic]
# httpBasicAuthUser = "foo"
# httpBasicPassword = "bar"
# TLS client configuration. https://golang.org/pkg/crypto/tls/#Config
#
# Optional
#
# [marathon.TLS]
# InsecureSkipVerify = true
# DCOSToken for DCOS environment, This will override the Authorization header
#
# Optional
#
# dcosToken = "xxxxxx"
```
Labels can be used on containers to override default behaviour:
- `traefik.backend=foo`: assign the application to `foo` backend
- `traefik.portIndex=1`: register port by index in the application's ports array. Useful when the application exposes multiple ports.
- `traefik.port=80`: register the explicit application port value. Cannot be used alongside `traefik.portIndex`.
- `traefik.protocol=https`: override the default `http` protocol
- `traefik.weight=10`: assign this weight to the application
- `traefik.enable=false`: disable this application in Træfɪk
- `traefik.frontend.rule=Host:test.traefik.io`: override the default frontend rule (Default: `Host:{containerName}.{domain}`).
- `traefik.frontend.passHostHeader=true`: forward client `Host` header to the backend.
- `traefik.frontend.priority=10`: override default frontend priority
- `traefik.frontend.entryPoints=http,https`: assign this frontend to entry points `http` and `https`. Overrides `defaultEntryPoints`.
## Kubernetes Ingress backend
Træfɪk can be configured to use Kubernetes Ingress as a backend configuration:
```toml
################################################################
# Kubernetes Ingress configuration backend
################################################################
# Enable Kubernetes Ingress configuration backend
#
# Optional
#
[kubernetes]
# Kubernetes server endpoint
#
# When deployed as a replication controller in Kubernetes,
# Traefik will use env variable KUBERNETES_SERVICE_HOST
# and KUBERNETES_SERVICE_PORT_HTTPS as endpoint
# Secure token will be found in /var/run/secrets/kubernetes.io/serviceaccount/token
# and SSL CA cert in /var/run/secrets/kubernetes.io/serviceaccount/ca.crt
#
# Optional
#
# endpoint = "http://localhost:8080"
# namespaces = ["default","production"]
#
# See: http://kubernetes.io/docs/user-guide/labels/#list-and-watch-filtering
# labelselector = "A and not B"
#
```
Annotations can be used on containers to override default behaviour for the whole Ingress resource:
- `traefik.frontend.rule.type: PathPrefixStrip`: override the default frontend rule type (Default: `PathPrefix`).
You can find here an example [ingress](https://raw.githubusercontent.com/containous/traefik/master/examples/k8s.ingress.yaml) and [replication controller](https://raw.githubusercontent.com/containous/traefik/master/examples/k8s.rc.yaml).
## Consul backend
Træfɪk can be configured to use Consul as a backend configuration:
```toml
################################################################
# Consul KV configuration backend
################################################################
# Enable Consul KV configuration backend
#
# Optional
#
[consul]
# Consul server endpoint
#
# Required
#
endpoint = "127.0.0.1:8500"
# Enable watch Consul changes
#
# Optional
#
watch = true
# Prefix used for KV store.
#
# Optional
#
prefix = "traefik"
# Override default configuration template. For advanced users :)
#
# Optional
#
# filename = "consul.tmpl"
# Enable consul TLS connection
#
# Optional
#
# [consul.tls]
# ca = "/etc/ssl/ca.crt"
# cert = "/etc/ssl/consul.crt"
# key = "/etc/ssl/consul.key"
# insecureskipverify = true
```
2016-07-11 15:32:28 +00:00
Please refer to the [Key Value storage structure](/user-guide/kv-config/#key-value-storage-structure) section to get documentation on traefik KV structure.
## Consul catalog backend
Træfɪk can be configured to use service discovery catalog of Consul as a backend configuration:
```toml
################################################################
# Consul Catalog configuration backend
################################################################
# Enable Consul Catalog configuration backend
#
# Optional
#
[consulCatalog]
# Consul server endpoint
#
# Required
#
endpoint = "127.0.0.1:8500"
# Default domain used.
#
# Optional
#
domain = "consul.localhost"
# Prefix for Consul catalog tags
#
# Optional
#
prefix = "traefik"
```
This backend will create routes matching on hostname based on the service name
used in consul.
Additional settings can be defined using Consul Catalog tags:
- `traefik.enable=false`: disable this container in Træfɪk
- `traefik.protocol=https`: override the default `http` protocol
- `traefik.backend.weight=10`: assign this weight to the container
- `traefik.backend.circuitbreaker=NetworkErrorRatio() > 0.5`
- `traefik.backend.loadbalancer=drr`: override the default load balancing mode
- `traefik.frontend.rule=Host:test.traefik.io`: override the default frontend rule (Default: `Host:{containerName}.{domain}`).
- `traefik.frontend.passHostHeader=true`: forward client `Host` header to the backend.
- `traefik.frontend.priority=10`: override default frontend priority
- `traefik.frontend.entryPoints=http,https`: assign this frontend to entry points `http` and `https`. Overrides `defaultEntryPoints`.
## Etcd backend
Træfɪk can be configured to use Etcd as a backend configuration:
```toml
################################################################
# Etcd configuration backend
################################################################
# Enable Etcd configuration backend
#
# Optional
#
[etcd]
# Etcd server endpoint
#
# Required
#
2016-07-11 11:36:35 +00:00
endpoint = "127.0.0.1:2379"
# Enable watch Etcd changes
#
# Optional
#
watch = true
# Prefix used for KV store.
#
# Optional
#
prefix = "/traefik"
# Override default configuration template. For advanced users :)
#
# Optional
#
# filename = "etcd.tmpl"
# Enable etcd TLS connection
#
# Optional
#
# [etcd.tls]
# ca = "/etc/ssl/ca.crt"
# cert = "/etc/ssl/etcd.crt"
# key = "/etc/ssl/etcd.key"
# insecureskipverify = true
```
2016-07-11 15:32:28 +00:00
Please refer to the [Key Value storage structure](/user-guide/kv-config/#key-value-storage-structure) section to get documentation on traefik KV structure.
## Zookeeper backend
Træfɪk can be configured to use Zookeeper as a backend configuration:
```toml
################################################################
# Zookeeper configuration backend
################################################################
# Enable Zookeeperconfiguration backend
#
# Optional
#
[zookeeper]
# Zookeeper server endpoint
#
# Required
#
endpoint = "127.0.0.1:2181"
# Enable watch Zookeeper changes
#
# Optional
#
watch = true
# Prefix used for KV store.
#
# Optional
#
prefix = "/traefik"
# Override default configuration template. For advanced users :)
#
# Optional
#
# filename = "zookeeper.tmpl"
```
2016-07-11 15:32:28 +00:00
Please refer to the [Key Value storage structure](/user-guide/kv-config/#key-value-storage-structure) section to get documentation on traefik KV structure.
## BoltDB backend
Træfɪk can be configured to use BoltDB as a backend configuration:
```toml
################################################################
# BoltDB configuration backend
################################################################
# Enable BoltDB configuration backend
#
# Optional
#
[boltdb]
# BoltDB file
#
# Required
#
endpoint = "/my.db"
# Enable watch BoltDB changes
#
# Optional
#
watch = true
# Prefix used for KV store.
#
# Optional
#
prefix = "/traefik"
# Override default configuration template. For advanced users :)
#
# Optional
#
# filename = "boltdb.tmpl"
```
2016-07-11 15:32:28 +00:00
Please refer to the [Key Value storage structure](/user-guide/kv-config/#key-value-storage-structure) section to get documentation on traefik KV structure.