################################################################
# Global configuration
################################################################

# Duration to give active requests a chance to finish before Traefik stops.
# Can be provided in a format supported by [time.ParseDuration](https://golang.org/pkg/time/#ParseDuration) or as raw values (digits).
# If no units are provided, the value is parsed assuming seconds.
# Note: in this time frame no new requests are accepted.
#
# Optional
# Default: "10s"
#
# graceTimeOut = "10s"

# Enable debug mode
#
# Optional
# Default: false
#
# debug = true

# Periodically check if a new version has been released
#
# Optional
# Default: true
#
# checkNewVersion = false

# Traefik logs file
# If not defined, logs to stdout
#
# Optional
#
# traefikLogsFile = "log/traefik.log"

# Access logs file
#
# Optional
# Deprecated - see [accessLog] lower down
#
# accessLogsFile = "log/access.log"

# Log level
#
# Optional
# Default: "ERROR"
#
# logLevel = "ERROR"

# Backends throttle duration: minimum duration in seconds between 2 events from providers
# before applying a new configuration. It avoids unnecessary reloads if multiples events
# are sent in a short amount of time.
# Can be provided in a format supported by Go's time.ParseDuration function or
# as raw values (digits). If no units are provided, the value is parsed assuming
# seconds.
#
# Optional
# Default: "2s"
#
# ProvidersThrottleDuration = "5s"

# Controls the maximum idle (keep-alive) connections to keep per-host. If zero, DefaultMaxIdleConnsPerHost
# from the Go standard library net/http module is used.
# If you encounter 'too many open files' errors, you can either increase this
# value or change the `ulimit`.
#
# Optional
# Default: 200
#
# MaxIdleConnsPerHost = 200

# If set to true invalid SSL certificates are accepted for backends.
# Note: This disables detection of man-in-the-middle attacks so should only be used on secure backend networks.
# Optional
# Default: false
#
# InsecureSkipVerify = true

# Register Certificates in the RootCA. This certificates will be use for backends calls.
# Note: You can use file path or cert content directly
# Optional
# Default: []
#
# RootCAs = [ "/mycert.cert" ]

# Entrypoints to be used by frontends that do not specify any entrypoint.
# Each frontend can specify its own entrypoints.
#
# Optional
# Default: ["http"]
#
# defaultEntryPoints = ["http", "https"]

# Constraints definition
#
# Optional
#
# Simple matching constraint
# constraints = ["tag==api"]
#
# Simple mismatching constraint
# constraints = ["tag!=api"]
#
# Globbing
# constraints = ["tag==us-*"]
#
# Backend-specific constraint
# [consulCatalog]
#   endpoint = "127.0.0.1:8500"
#   constraints = ["tag==api"]
#
# Multiple constraints
#   - "tag==" must match with at least one tag
#   - "tag!=" must match with none of tags
# constraints = ["tag!=us-*", "tag!=asia-*"]
# [consulCatalog]
#   endpoint = "127.0.0.1:8500"
#   constraints = ["tag==api", "tag!=v*-beta"]

# Enable ACME (Let's Encrypt): automatic SSL
#
# Optional
#
# [acme]

# Email address used for registration
#
# Required
#
# email = "test@traefik.io"

# File or key used for certificates storage.
# WARNING, if you use Traefik in Docker, you have 2 options:
#  - create a file on your host and mount it as a volume
#      storageFile = "acme.json"
#      $ docker run -v "/my/host/acme.json:acme.json" traefik
#  - mount the folder containing the file as a volume
#      storageFile = "/etc/traefik/acme/acme.json"
#      $ docker run -v "/my/host/acme:/etc/traefik/acme" traefik
#
# Required
#
# storage = "acme.json" # or "traefik/acme/account" if using KV store

# Entrypoint to proxy acme challenge/apply certificates to.
# WARNING, must point to an entrypoint on port 443
#
# Required
#
# entryPoint = "https"

# Use a DNS based acme challenge rather than external HTTPS access, e.g. for a firewalled server
# Select the provider that matches the DNS domain that will host the challenge TXT record,
# and provide environment variables with access keys to enable setting it:
#  - cloudflare: CLOUDFLARE_EMAIL, CLOUDFLARE_API_KEY
#  - digitalocean: DO_AUTH_TOKEN
#  - dnsimple: DNSIMPLE_EMAIL, DNSIMPLE_OAUTH_TOKEN
#  - dnsmadeeasy: DNSMADEEASY_API_KEY, DNSMADEEASY_API_SECRET
#  - exoscale: EXOSCALE_API_KEY, EXOSCALE_API_SECRET
#  - gandi: GANDI_API_KEY
#  - linode: LINODE_API_KEY
#  - manual: none, but run traefik interactively & turn on acmeLogging to see instructions & press Enter
#  - namecheap: NAMECHEAP_API_USER, NAMECHEAP_API_KEY
#  - rfc2136: RFC2136_TSIG_KEY, RFC2136_TSIG_SECRET, RFC2136_TSIG_ALGORITHM, RFC2136_NAMESERVER
#  - route53: AWS_ACCESS_KEY_ID, AWS_SECRET_ACCESS_KEY, AWS_REGION, or configured user/instance IAM profile
#  - dyn: DYN_CUSTOMER_NAME, DYN_USER_NAME, DYN_PASSWORD
#  - vultr: VULTR_API_KEY
#  - ovh: OVH_ENDPOINT, OVH_APPLICATION_KEY, OVH_APPLICATION_SECRET, OVH_CONSUMER_KEY
#  - pdns: PDNS_API_KEY, PDNS_API_URL
#
# Optional
#
# dnsProvider = "digitalocean"

# By default, the dnsProvider will verify the TXT DNS challenge record before letting ACME verify
# If delayDontCheckDNS is greater than zero, avoid this & instead just wait so many seconds.
# Useful if internal networks block external DNS queries
#
# Optional
#
# delayDontCheckDNS = 0

# If true, display debug log messages from the acme client library
#
# Optional
#
# acmeLogging = true

# Enable on demand certificate. This will request a certificate from Let's Encrypt during the first TLS handshake for a hostname that does not yet have a certificate.
# WARNING, TLS handshakes will be slow when requesting a hostname certificate for the first time, this can leads to DoS attacks.
# WARNING, Take note that Let's Encrypt have rate limiting: https://letsencrypt.org/docs/rate-limits
#
# Optional
#
# onDemand = true

# Enable certificate generation on frontends Host rules. This will request a certificate from Let's Encrypt for each frontend with a Host rule.
# For example, a rule Host:test1.traefik.io,test2.traefik.io will request a certificate with main domain test1.traefik.io and SAN test2.traefik.io.
#
# Optional
#
# OnHostRule = true

# CA server to use
# Uncomment the line to run on the staging let's encrypt server
# Leave comment to go to prod
#
# Optional
#
# caServer = "https://acme-staging.api.letsencrypt.org/directory"

# Domains list
# You can provide SANs (alternative domains) to each main domain
# All domains must have A/AAAA records pointing to Traefik
# WARNING, Take note that Let's Encrypt have rate limiting: https://letsencrypt.org/docs/rate-limits
# Each domain & SANs will lead to a certificate request.
#
# [[acme.domains]]
#   main = "local1.com"
#   sans = ["test1.local1.com", "test2.local1.com"]
# [[acme.domains]]
#   main = "local2.com"
#   sans = ["test1.local2.com", "test2x.local2.com"]
# [[acme.domains]]
#   main = "local3.com"
# [[acme.domains]]
#   main = "local4.com"


# Enable access logs
# By default it will write to stdout and produce logs in the textual
# Common Log Format (CLF), extended with additional fields.
#
# Optional
#
# [accessLog]

# Sets the file path for the access log. If not specified, stdout will be used.
# Intermediate directories are created if necessary.
#
# Optional
# Default: os.Stdout
#
# filePath = "/path/to/log/log.txt"

# Format is either "json" or "common".
#
# Optional
# Default: "common"
#
# format = "common"

# Entrypoints definition
#
# Optional
# Default:
# [entryPoints]
#   [entryPoints.http]
#   address = ":80"
#
# To redirect an http entrypoint to an https entrypoint (with SNI support):
# [entryPoints]
#   [entryPoints.http]
#   address = ":80"
#     [entryPoints.http.redirect]
#       entryPoint = "https"
#   [entryPoints.https]
#   address = ":443"
#     [entryPoints.https.tls]
#       [[entryPoints.https.tls.certificates]]
#       CertFile = "integration/fixtures/https/snitest.com.cert"
#       KeyFile = "integration/fixtures/https/snitest.com.key"
#       [[entryPoints.https.tls.certificates]]
#       CertFile = "integration/fixtures/https/snitest.org.cert"
#       KeyFile = "integration/fixtures/https/snitest.org.key"
#
# To redirect an entrypoint rewriting the URL:
# [entryPoints]
#   [entryPoints.http]
#   address = ":80"
#     [entryPoints.http.redirect]
#       regex = "^http://localhost/(.*)"
#       replacement = "http://mydomain/$1"
#
# To enable basic auth on an entrypoint
# with 2 user/pass: test:test and test2:test2
# Passwords can be encoded in MD5, SHA1 and BCrypt: you can use htpasswd to generate those ones
# Users can be specified directly in the toml file, or indirectly by referencing an external file; if both are provided, the two are merged, with external file contents having precedence
# [entryPoints]
#   [entryPoints.http]
#   address = ":80"
#   [entryPoints.http.auth.basic]
#   users = ["test:$apr1$H6uskkkW$IgXLP6ewTrSuBkTrqE8wj/", "test2:$apr1$d9hr9HBB$4HxwgUir3HP4EsggP/QNo0"]
#   usersFile = "/path/to/.htpasswd"
#
# To enable digest auth on an entrypoint
# with 2 user/realm/pass: test:traefik:test and test2:traefik:test2
# You can use htdigest to generate those ones
# Users can be specified directly in the toml file, or indirectly by referencing an external file; if both are provided, the two are merged, with external file contents having precedence
# [entryPoints]
#   [entryPoints.http]
#   address = ":80"
#   [entryPoints.http.auth.basic]
#   users = ["test:traefik:a2688e031edb4be6a3797f3882655c05 ", "test2:traefik:518845800f9e2bfb1f1f740ec24f074e"]
#   usersFile = "/path/to/.htdigest"
#
# To specify an https entrypoint with a minimum TLS version, and specifying an array of cipher suites (from crypto/tls):
# [entryPoints]
#   [entryPoints.https]
#   address = ":443"
#     [entryPoints.https.tls]
#     MinVersion = "VersionTLS12"
#     CipherSuites = ["TLS_RSA_WITH_AES_256_GCM_SHA384"]
#       [[entryPoints.https.tls.certificates]]
#       CertFile = "integration/fixtures/https/snitest.com.cert"
#       KeyFile = "integration/fixtures/https/snitest.com.key"
#       [[entryPoints.https.tls.certificates]]
#       CertFile = "integration/fixtures/https/snitest.org.cert"
#       KeyFile = "integration/fixtures/https/snitest.org.key"

# To enable compression support using gzip format:
# [entryPoints]
#   [entryPoints.http]
#   address = ":80"
#   compress = true

# To bind to a particular IP address only:
# [entryPoints]
#   [entryPoints.http]
#   address = "10.42.13.37:80"

# To enable IP whitelisting at the entrypoint level:
# [entryPoints]
#   [entryPoints.http]
#   address = ":80"
#   whiteListSourceRange = ["127.0.0.1/32"]

# Enable retry sending request if network error
#
# Optional
#
# [retry]

# Number of attempts
#
# Optional
# Default: (number servers in backend) -1
#
# attempts = 3

# Enable custom health check options.
#
# Optional
#
# [healthcheck]

# Set the default health check interval. Will only be effective if health check
# paths are defined. Given provider-specific support, the value may be
# overridden on a per-backend basis.
# Can be provided in a format supported by Go's time.ParseDuration function or
# as raw values (digits). If no units are provided, the value is parsed assuming
# seconds.
#
# Optional
# Default: "30s"
#
# interval = "30s"

# Timeout settings for the http servers Traefik starts
#
# Optional
#
# [respondingTimeouts]

# ReadTimeout is the maximum duration for reading the entire request, including the body.
# If zero, no timeout exists.
#
# Optional
# Default: "0s"
#
# readTimeout = "5s"

# WriteTimeout is the maximum duration before timing out writes of the response.
# If zero, no timeout exists.
#
# Optional
# Default: "0s"
#
# writeTimeout = "5s"

# IdleTimeout is the maximum amount duration an idle (keep-alive) connection will remain idle before closing itself.
# Defaults to 180 seconds.
# If zero, no timeout exists.
#
# Optional
# Default: "180s"
#
# idleTimeout = "360s"

# Timeout settings for requests forwarded to the Backend Servers
#
# Optional
#
# [forwardingTimeouts]

# The amount of time to wait until a connection to a Backend Server can be established.
# If zero, no timeout exists.
#
# Optional
# Default: "30s"
#
# dialTimeout = "30s"

# The amount of time to wait for a server's response headers after fully writing the request (including its body, if any). If zero, no timeout exists
#
# Optional
# Default: "0s"
#
# responseHeaderTimeout = "0s"

################################################################
# Web configuration backend
################################################################

# Enable web configuration backend
#
# Optional
#
# [web]

# Web administration port
#
# Required
#
# address = ":8080"

# SSL certificate and key used
#
# Optional
#
# CertFile = "traefik.crt"
# KeyFile = "traefik.key"
#
# Set REST API to read-only mode
#
# Optional
# ReadOnly = false
#
# Enable more detailed statistics
# [web.statistics]
#   RecentErrors = 10
#
# To enable Traefik to export internal metrics to Prometheus
# [web.metrics.prometheus]
#   Buckets=[0.1,0.3,1.2,5.0]
#

# To enable basic auth on the webui
# with 2 user/pass: test:test and test2:test2
# Passwords can be encoded in MD5, SHA1 and BCrypt: you can use htpasswd to generate those ones
# Users can be specified directly in the toml file, or indirectly by referencing an external file; if both are provided, the two are merged, with external file contents having precedence
#   [web.auth.basic]
#     users = ["test:$apr1$H6uskkkW$IgXLP6ewTrSuBkTrqE8wj/", "test2:$apr1$d9hr9HBB$4HxwgUir3HP4EsggP/QNo0"]
#     usersFile = "/path/to/.htpasswd"
# To enable digest auth on the webui
# with 2 user/realm/pass: test:traefik:test and test2:traefik:test2
# You can use htdigest to generate those ones
# Users can be specified directly in the toml file, or indirectly by referencing an external file; if both are provided, the two are merged, with external file contents having precedence
#   [web.auth.digest]
#     users = ["test:traefik:a2688e031edb4be6a3797f3882655c05 ", "test2:traefik:518845800f9e2bfb1f1f740ec24f074e"]
#     usersFile = "/path/to/.htdigest"


################################################################
# File configuration backend
################################################################

# Enable file configuration backend
#
# Optional
#
# [file]

# Rules file
# If defined, traefik will load rules from this file,
# otherwise, it will load rules from current file (cf Sample rules below).
#
# Optional
#
# filename = "rules.toml"

# Rules file
# If defined, traefik will load rules from .toml files in this directory.
#
# Optional
#
# directory = "/path/to/config/"


# Enable watch file changes
#
# Optional
#
# watch = true


################################################################
# Docker configuration backend
################################################################

# Enable Docker configuration backend
#
# Optional
#
# [docker]

# Docker server endpoint. Can be a tcp or a unix socket endpoint.
#
# Required
#
# endpoint = "unix:///var/run/docker.sock"

# Default domain used.
# Can be overridden by setting the "traefik.domain" label on a container.
#
# Required
#
# domain = "docker.localhost"

# Enable watch docker changes
#
# Optional
#
# watch = true

# Override default configuration template. For advanced users :)
#
# Optional
#
# filename = "docker.tmpl"

# Expose containers by default in traefik
#
# Optional
# Default: true
#
# exposedbydefault = true

# Enable docker TLS connection
#
# Optional
#
#  [docker.tls]
#  ca = "/etc/ssl/ca.crt"
#  cert = "/etc/ssl/docker.crt"
#  key = "/etc/ssl/docker.key"
#  insecureskipverify = true



################################################################
# Docker Swarmmode configuration backend
################################################################

# Enable Docker configuration backend
#
# Optional
#
# [docker]

# Docker server endpoint. Can be a tcp or a unix socket endpoint.
#
# Required
#
# endpoint = "tcp://127.0.0.1:2375"

# Default domain used.
# Can be overridden by setting the "traefik.domain" label on a services.
#
# Required
#
# domain = "docker.localhost"

# Enable watch docker changes
#
# Optional
#
# watch = true

# Use Docker Swarm Mode as data provider
#
# Optional
#
# swarmmode = true

# Override default configuration template. For advanced users :)
#
# Optional
#
# filename = "docker.tmpl"

# Expose services by default in traefik
#
# Optional
# Default: true
#
# exposedbydefault = true

# Enable docker TLS connection
#
# Optional
#
#  [swarm.tls]
#  ca = "/etc/ssl/ca.crt"
#  cert = "/etc/ssl/docker.crt"
#  key = "/etc/ssl/docker.key"
#  insecureskipverify = true

# Constraints
#
# Optional
#
# constraints = ["tag==api", "tag==he*ld"]
# Matching with containers having the label "traefik.tags" set to "api,helloworld"
# ex: $ docker run -d -P --label traefik.tags=api,helloworld emilevauge/whoami


################################################################
# Mesos/Marathon configuration backend
################################################################

# Enable Marathon configuration backend
#
# Optional
#
# [marathon]

# Marathon server endpoint.
# You can also specify multiple endpoint for Marathon:
# endpoint := "http://10.241.1.71:8080,10.241.1.72:8080,10.241.1.73:8080"
#
# Required
#
# endpoint = "http://127.0.0.1:8080"

# Enable watch Marathon changes
#
# Optional
#
# watch = true

# Default domain used.
# Can be overridden by setting the "traefik.domain" label on an application.
#
# Required
#
# domain = "marathon.localhost"

# Override default configuration template. For advanced users :)
#
# Optional
#
# filename = "marathon.tmpl"

# Expose Marathon apps by default in traefik
#
# Optional
# Default: true
#
# exposedByDefault = true

# Convert Marathon groups to subdomains
# Default behavior: /foo/bar/myapp => foo-bar-myapp.{defaultDomain}
# with groupsAsSubDomains enabled: /foo/bar/myapp => myapp.bar.foo.{defaultDomain}
#
# Optional
# Default: false
#
# groupsAsSubDomains = true

# Override DialerTimeout
# Amount of time to allow the Marathon provider to wait to open a TCP connection
# to a Marathon master.
# Can be provided in a format supported by Go's time.ParseDuration function or
# as raw values (digits). If no units are provided, the value is parsed assuming
# seconds.
#
# Optional
# Default: "60s"
# dialerTimeout = "60s"

# Enable Marathon basic authentication
#
# Optional
#
#  [marathon.basic]
#  httpBasicAuthUser = "foo"
#  httpBasicPassword = "bar"

# DCOSToken for DCOS environment, This will override the Authorization header
#
# Optional
#
# dcosToken = "xxxxxx"


# Set the TCP Keep Alive interval for the Marathon HTTP Client.
# Can be provided in a format supported by Go's time.ParseDuration function or
# as raw values (digits). If no units are provided, the value is parsed assuming
# seconds.
#
# Optional
# Default: "10s"
#
# keepAlive = "10s"

# By default, a task's IP address (as returned by the Marathon API) is used as 
# backend server if an IP-per-task configuration can be found; otherwise, the
# name of the host running the task is used.
# The latter behavior can be enforced by enabling this switch.
# 
# Optional
# Default: false
#
# forceTaskHostname: false 

# Applications may define readiness checks which are probed by Marathon during
# deployments periodically and the results exposed via the API. Enabling the
# following parameter causes Traefik to filter out tasks whose readiness checks
# have not succeeded.
# Note that the checks are only valid at deployment times. See the Marathon
# guide for details.
#
# Optional
# Default: false
# respectReadinessChecks: false

################################################################
# Mesos configuration backend
################################################################

# Enable Mesos configuration backend
#
# Optional
#
# [mesos]

# Mesos server endpoint.
# You can also specify multiple endpoint for Mesos:
# endpoint = "192.168.35.40:5050,192.168.35.41:5050,192.168.35.42:5050"
# endpoint = "zk://192.168.35.20:2181,192.168.35.21:2181,192.168.35.22:2181/mesos"
#
# Required
#
# endpoint = "http://127.0.0.1:8080"

# Enable watch Mesos changes
#
# Optional
#
# watch = true

# Default domain used.
# Can be overridden by setting the "traefik.domain" label on an application.
#
# Required
#
# domain = "mesos.localhost"

# Override default configuration template. For advanced users :)
#
# Optional
#
# filename = "mesos.tmpl"

# Expose Mesos apps by default in traefik
#
# Optional
# Default: false
#
# ExposedByDefault = true

# TLS client configuration. https://golang.org/pkg/crypto/tls/#Config
#
# Optional
#
# [mesos.TLS]
# InsecureSkipVerify = true

# Zookeeper timeout (in seconds)
#
# Optional
# Default: 30
#
# ZkDetectionTimeout = 30

# Polling interval (in seconds)
#
# Optional
# Default: 30
#
# RefreshSeconds = 30

# IP sources (e.g. host, docker, mesos, rkt)
#
# Optional
#
# IPSources = "host"

# HTTP Timeout (in seconds)
#
# Optional
# Default: 30
#
# StateTimeoutSecond = "30"

################################################################
# Kubernetes Ingress configuration backend
################################################################
# Enable Kubernetes Ingress configuration backend
#
# Optional
#
# [kubernetes]

# Kubernetes server endpoint
#
# When deployed as a replication controller in Kubernetes, Traefik will use
# the environment variables KUBERNETES_SERVICE_HOST and KUBERNETES_SERVICE_PORT
# to construct the endpoint.
# Secure token will be found in /var/run/secrets/kubernetes.io/serviceaccount/token
# and SSL CA cert in /var/run/secrets/kubernetes.io/serviceaccount/ca.crt
#
# The endpoint may be given to override the environment variable values.
#
# When the environment variables are not found, Traefik will try to connect to
# the Kubernetes API server with an external-cluster client. In this case, the
# endpoint is required. Specifically, it may be set to the URL used by
# `kubectl proxy` to connect to a Kubernetes cluster from localhost.
#
# Optional for in-cluster configuration, required otherwise
# Default: empty
#
# endpoint = "http://127.0.0.1:8001"

# Bearer token used for the Kubernetes client configuration.
#
# Optional
# Default: empty
#
# token = "my token"

# Path to the certificate authority file used for the Kubernetes client
# configuration.
#
# Optional
# Default: empty
#
# certAuthFilePath = "/my/ca.crt"

# Array of namespaces to watch.
#
# Optional
# Default: all namespaces (empty array).
#
# namespaces = ["default"]

# See: http://kubernetes.io/docs/user-guide/labels/#list-and-watch-filtering
# labelselector = "A and not B"

################################################################
# Consul KV configuration backend
################################################################

# Enable Consul KV configuration backend
#
# Optional
#
# [consul]

# Consul server endpoint
#
# Required
#
# endpoint = "127.0.0.1:8500"

# Enable watch Consul changes
#
# Optional
#
# watch = true

# Prefix used for KV store.
#
# Optional
#
# prefix = "traefik"

# Override default configuration template. For advanced users :)
#
# Optional
#
# filename = "consul.tmpl"

# Enable consul TLS connection
#
# Optional
#
# [consul.tls]
# ca = "/etc/ssl/ca.crt"
# cert = "/etc/ssl/consul.crt"
# key = "/etc/ssl/consul.key"
# insecureskipverify = true

################################################################
# Consul Catalog configuration backend
################################################################

# Enable Consul Catalog configuration backend
#
# Optional
#
# [consulCatalog]

# Consul server endpoint
#
# Required
#
# endpoint = "127.0.0.1:8500"

# Default domain used.
#
# Optional
#
# domain = "consul.localhost"

# Prefix for Consul catalog tags
#
# Optional
#
# prefix = "traefik"

# Default frontEnd Rule for Consul services
#  - The format is a Go Template with ".ServiceName", ".Domain" and ".Attributes" available
#  -- "getTag(name, tags, defaultValue)", "hasTag(name, tags)" and "getAttribute(name, tags, defaultValue)" functions are available
#  --- "getAttribute(...)" function uses prefixed tag names based on "prefix" value
#
# Optional
#
#frontEndRule = "Host:{{.ServiceName}}.{{Domain}}"

# Should use all Consul catalog tags for constraint filtering
#
# Optional
#
#allTagsConstraintFiltering = false

# Constraints
#
# Optional
#
# constraints = ["tag==api", "tag==he*ld"]
# Matching with containers having this tag: "traefik.tags=api,helloworld"

################################################################
# Etcd configuration backend
################################################################

# Enable Etcd configuration backend
#
# Optional
#
# [etcd]

# Etcd server endpoint
#
# Required
#
# endpoint = "127.0.0.1:2379"

# Enable watch Etcd changes
#
# Optional
#
# watch = true

# Prefix used for KV store.
#
# Optional
#
# prefix = "/traefik"

# Override default configuration template. For advanced users :)
#
# Optional
#
# filename = "etcd.tmpl"

# Use etcd user/pass authentication
#
# Optional
#
# username = foo
# password = bar

# Enable etcd TLS connection
#
# Optional
#
# [etcd.tls]
# ca = "/etc/ssl/ca.crt"
# cert = "/etc/ssl/etcd.crt"
# key = "/etc/ssl/etcd.key"
# insecureskipverify = true

################################################################
# Zookeeper configuration backend
################################################################

# Enable Zookeeperconfiguration backend
#
# Optional
#
# [zookeeper]

# Zookeeper server endpoint
#
# Required
#
# endpoint = "127.0.0.1:2181"

# Enable watch Zookeeper changes
#
# Optional
#
# watch = true

# Prefix used for KV store.
#
# Optional
#
# prefix = "/traefik"

# Override default configuration template. For advanced users :)
#
# Optional
#
# filename = "zookeeper.tmpl"


################################################################
# BoltDB configuration backend
################################################################

# Enable BoltDB configuration backend
#
# Optional
#
# [boltdb]

# BoltDB file
#
# Required
#
# endpoint = "/my.db"

# Enable watch BoltDB changes
#
# Optional
#
# watch = true

# Prefix used for KV store.
#
# Optional
#
# prefix = "/traefik"

# Override default configuration template. For advanced users :)
#
# Optional
#
# filename = "boltdb.tmpl"


################################################################
# ECS configuration backend
################################################################

# Enable ECS configuration backend
#
# Optional
#
# [ecs]

# ECS Cluster Name
#
# Optional
# Default: "default"
#
# Cluster = "default"

# Enable watch ECS changes
#
# Optional
# Default: true
#
# Watch = true

# Polling interval (in seconds)
#
# Optional
# Default: 15
#
# RefreshSeconds = 15

# Expose ECS services by default in traefik
#
# Optional
# Default: true
#
# ExposedByDefault = false

# Region to use when connecting to AWS
#
# Optional
#
# Region = "us-east-1"

# AccessKeyID to use when connecting to AWS
#
# Optional
#
# AccessKeyID = "abc"

# SecretAccessKey to use when connecting to AWS
#
# Optional
#
# SecretAccessKey = "123"

# Override default configuration template. For advanced users :)
#
# Optional
#
# filename = "ecs.tmpl"

################################################################
# Rancher configuration backend
################################################################

# Enable Rancher configuration backend
#
# Optional
#
# [rancher]

# Default domain used.
# Can be overridden by setting the "traefik.domain" label on an service.
#
# Required
#
# domain = "rancher.localhost"

# Enable watch Rancher changes
#
# Optional
# Default: true
#
# Watch = true

# Polling interval (in seconds)
#
# Optional
#
# RefreshSeconds = 15

# Expose Rancher services by default in traefik
#
# Optional
# Default: true
#
# ExposedByDefault = false

# Filter services with unhealthy states and inactive states
#
# Optional
# Default: false
#
# EnableServiceHealthFilter = true

# Enable Rancher metadata service configuration backend instead of the API
# configuration backend
#
# Optional
# Default: false
#
# [rancher.metadata]

# Poll the Rancher metadata service for changes every `rancher.RefreshSeconds`
# NOTE: this is less accurate than the default long polling technique which
# will provide near instantaneous updates to Traefik
#
# Optional
# Default: false
#
# IntervalPoll = true

# Prefix used for accessing the Rancher metadata service
#
# Optional
# Default: "/latest"
#
# Prefix = "/2016-07-29"

# Enable Rancher API configuration backend
#
# Optional
# Default: true
#
# [rancher.api]

# Endpoint to use when connecting to the Rancher API
#
# Required
# Endpoint = "http://rancherserver.example.com/v1"

# AccessKey to use when connecting to the Rancher API
#
# Required
# AccessKey = "XXXXXXXXXXXXXXXXXXXX"

# SecretKey to use when connecting to the Rancher API
#
# Required
# SecretKey = "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"

################################################################
# DynamoDB configuration backend
################################################################

# Enable DynamoDB configuration backend
#
# Optional
#
# [dynamodb]

# DynamoDB Table Name
#
# Optional
#
# TableName = "traefik"

# Enable watch DynamoDB changes
#
# Optional
#
# Watch = true

# Polling interval (in seconds)
#
# Optional
#
# RefreshSeconds = 15

# Region to use when connecting to AWS
#
# Required
#
# Region = "us-east-1"

# AccessKeyID to use when connecting to AWS
#
# Optional
#
# AccessKeyID = "abc"

# SecretAccessKey to use when connecting to AWS
#
# Optional
#
# SecretAccessKey = "123"

# Endpoint of dynamodb when testing locally
#
# Optional
#
# Endpoint = "http://localhost:8080"


################################################################
# Sample rules
################################################################
# [backends]
#   [backends.backend1]
#     [backends.backend1.circuitbreaker]
#       expression = "NetworkErrorRatio() > 0.5"
#     [backends.backend1.servers.server1]
#     url = "http://172.17.0.2:80"
#     weight = 10
#     [backends.backend1.servers.server2]
#     url = "http://172.17.0.3:80"
#     weight = 1
#   [backends.backend2]
#     [backends.backend2.LoadBalancer]
#       method = "drr"
#     [backends.backend2.servers.server1]
#     url = "http://172.17.0.4:80"
#     weight = 1
#     [backends.backend2.servers.server2]
#     url = "http://172.17.0.5:80"
#     weight = 2
#
# [frontends]
#   [frontends.frontend1]
#   backend = "backend2"
#     [frontends.frontend1.routes.test_1]
#     rule = "Host: test.localhost, other.localhost"
#   [frontends.frontend2]
#   backend = "backend1"
#   passHostHeader = true
#   entrypoints = ["https"] # overrides defaultEntryPoints
#     [frontends.frontend2.routes.test_1]
#     rule = "Host:{subdomain:[a-z]+}.localhost"
#   [frontends.frontend3]
#   entrypoints = ["http", "https"] # overrides defaultEntryPoints
#   backend = "backend2"
#     rule = "Path: /test, /other"