traefik/vendor/google.golang.org/grpc/codes/codes.go

/*
 *
 * Copyright 2014 gRPC authors.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 *
 */

// Package codes defines the canonical error codes used by gRPC. It is
// consistent across various languages.
package codes // import "google.golang.org/grpc/codes"

import (
	"fmt"
	"strconv"
)

// A Code is an unsigned 32-bit error code as defined in the gRPC spec.
type Code uint32

const (
	// OK is returned on success.
	OK Code = 0

	// Canceled indicates the operation was canceled (typically by the caller).
	Canceled Code = 1

	// Unknown error. An example of where this error may be returned is
	// if a Status value received from another address space belongs to
	// an error-space that is not known in this address space. Also
	// errors raised by APIs that do not return enough error information
	// may be converted to this error.
	Unknown Code = 2

	// InvalidArgument indicates client specified an invalid argument.
	// Note that this differs from FailedPrecondition. It indicates arguments
	// that are problematic regardless of the state of the system
	// (e.g., a malformed file name).
	InvalidArgument Code = 3

	// DeadlineExceeded means operation expired before completion.
	// For operations that change the state of the system, this error may be
	// returned even if the operation has completed successfully. For
	// example, a successful response from a server could have been delayed
	// long enough for the deadline to expire.
	DeadlineExceeded Code = 4

	// NotFound means some requested entity (e.g., file or directory) was
	// not found.
	NotFound Code = 5

	// AlreadyExists means an attempt to create an entity failed because one
	// already exists.
	AlreadyExists Code = 6

	// PermissionDenied indicates the caller does not have permission to
	// execute the specified operation. It must not be used for rejections
	// caused by exhausting some resource (use ResourceExhausted
	// instead for those errors). It must not be
	// used if the caller cannot be identified (use Unauthenticated
	// instead for those errors).
	PermissionDenied Code = 7

	// ResourceExhausted indicates some resource has been exhausted, perhaps
	// a per-user quota, or perhaps the entire file system is out of space.
	ResourceExhausted Code = 8

	// FailedPrecondition indicates operation was rejected because the
	// system is not in a state required for the operation's execution.
	// For example, directory to be deleted may be non-empty, an rmdir
	// operation is applied to a non-directory, etc.
	//
	// A litmus test that may help a service implementor in deciding
	// between FailedPrecondition, Aborted, and Unavailable:
	//  (a) Use Unavailable if the client can retry just the failing call.
	//  (b) Use Aborted if the client should retry at a higher-level
	//      (e.g., restarting a read-modify-write sequence).
	//  (c) Use FailedPrecondition if the client should not retry until
	//      the system state has been explicitly fixed. E.g., if an "rmdir"
	//      fails because the directory is non-empty, FailedPrecondition
	//      should be returned since the client should not retry unless
	//      they have first fixed up the directory by deleting files from it.
	//  (d) Use FailedPrecondition if the client performs conditional
	//      REST Get/Update/Delete on a resource and the resource on the
	//      server does not match the condition. E.g., conflicting
	//      read-modify-write on the same resource.
	FailedPrecondition Code = 9

	// Aborted indicates the operation was aborted, typically due to a
	// concurrency issue like sequencer check failures, transaction aborts,
	// etc.
	//
	// See litmus test above for deciding between FailedPrecondition,
	// Aborted, and Unavailable.
	Aborted Code = 10

	// OutOfRange means operation was attempted past the valid range.
	// E.g., seeking or reading past end of file.
	//
	// Unlike InvalidArgument, this error indicates a problem that may
	// be fixed if the system state changes. For example, a 32-bit file
	// system will generate InvalidArgument if asked to read at an
	// offset that is not in the range [0,2^32-1], but it will generate
	// OutOfRange if asked to read from an offset past the current
	// file size.
	//
	// There is a fair bit of overlap between FailedPrecondition and
	// OutOfRange. We recommend using OutOfRange (the more specific
	// error) when it applies so that callers who are iterating through
	// a space can easily look for an OutOfRange error to detect when
	// they are done.
	OutOfRange Code = 11

	// Unimplemented indicates operation is not implemented or not
	// supported/enabled in this service.
	Unimplemented Code = 12

	// Internal errors. Means some invariants expected by underlying
	// system has been broken. If you see one of these errors,
	// something is very broken.
	Internal Code = 13

	// Unavailable indicates the service is currently unavailable.
	// This is a most likely a transient condition and may be corrected
	// by retrying with a backoff.
	//
	// See litmus test above for deciding between FailedPrecondition,
	// Aborted, and Unavailable.
	Unavailable Code = 14

	// DataLoss indicates unrecoverable data loss or corruption.
	DataLoss Code = 15

	// Unauthenticated indicates the request does not have valid
	// authentication credentials for the operation.
	Unauthenticated Code = 16

	_maxCode = 17
)

var strToCode = map[string]Code{
	`"OK"`: OK,
	`"CANCELLED"`:/* [sic] */ Canceled,
	`"UNKNOWN"`:             Unknown,
	`"INVALID_ARGUMENT"`:    InvalidArgument,
	`"DEADLINE_EXCEEDED"`:   DeadlineExceeded,
	`"NOT_FOUND"`:           NotFound,
	`"ALREADY_EXISTS"`:      AlreadyExists,
	`"PERMISSION_DENIED"`:   PermissionDenied,
	`"RESOURCE_EXHAUSTED"`:  ResourceExhausted,
	`"FAILED_PRECONDITION"`: FailedPrecondition,
	`"ABORTED"`:             Aborted,
	`"OUT_OF_RANGE"`:        OutOfRange,
	`"UNIMPLEMENTED"`:       Unimplemented,
	`"INTERNAL"`:            Internal,
	`"UNAVAILABLE"`:         Unavailable,
	`"DATA_LOSS"`:           DataLoss,
	`"UNAUTHENTICATED"`:     Unauthenticated,
}

// UnmarshalJSON unmarshals b into the Code.
func (c *Code) UnmarshalJSON(b []byte) error {
	// From json.Unmarshaler: By convention, to approximate the behavior of
	// Unmarshal itself, Unmarshalers implement UnmarshalJSON([]byte("null")) as
	// a no-op.
	if string(b) == "null" {
		return nil
	}
	if c == nil {
		return fmt.Errorf("nil receiver passed to UnmarshalJSON")
	}

	if ci, err := strconv.ParseUint(string(b), 10, 32); err == nil {
		if ci >= _maxCode {
			return fmt.Errorf("invalid code: %q", ci)
		}

		*c = Code(ci)
		return nil
	}

	if jc, ok := strToCode[string(b)]; ok {
		*c = jc
		return nil
	}
	return fmt.Errorf("invalid code: %q", string(b))
}